| Detector | Encoder | Push Button | Pushwheel | Rocker | Rotary | Slide | Micro | Tactile | Modular |

| 20mm Coin Cell Holder | 3.5mm Socket | IEC-60320 Connector | Homepage |

TS CONTROL SWITCH


SPECIFICATION
Contact Rating: 
125VAC 15A; 250/400/600VAC 10A; 6/12/24/50VDC 5A (cUL)
16(10)A 250VAC; 10(6)A 300VAC; 6(4)A 500VAC (CE)
Contact Resistance: 50 milliohms max. at initial
Insulation Resistance: 100 megaohms min. at 500VDC
Dielectric Strength: 2500VAC 1 minute
Life: 50,000
 Operating Temperature: -20 to +80C
Humidity: 45 to 85%RH
Cutout: 22.5mm and 30.5mm
Terminal: screw
Protection: NEMA 3S(IP65)
Safety Standard Approval: E306249(1) E306249(2)
RoHS Compliant: yes


-Non-metal
-Easy installation
-Head unit mounts into panel up to 7mm thick
-Control blocks are color coded for easy identification: green for momentary closed, red for momentary open
-Pressure plate wiring terminals for easy and secure wiring; accepting up to 14-AWG wire
-Replacement bulbs are available
-12VDC and 110VAC LED lamps can be ordered separately and installed for longer life

Download: datasheet
 Contact: info@switchchannel.com
TS-22-RE-1 operator
22mm, twist-to-released 
emergency stop 		 TS-22-RL-3R
22mm pilot light
40mm in diammeter, red mushroom button, 22mm in diameter panel mounting hole. Press o latch, twised to unlock. Normally closed. Direct opening action mechanism. Degree of protection IP65.
TS-22-RP-1R
22mm push button operator		 TS-22-RP-1G
22mm push button operator		 TS-22-RP-1Y
22mm push button operator		 TS-22-RP-1B
22mm push button operator
TS-22-RS-1 selector
22mm
on-off, on-on 		 TS-22-RS-2 selector
22mm
on-off-on 		 TS-22-RS-4 selector
22mm, spring returned
(on)-off, on-(off), on-(on) 		 TS-22-RS-5 selector
 22mm, spring returned
(on)-off-(on)
Ignition switch, starter switch
TS-A contact block
NO, momentary  		 TS-B contact block
NC, momentary		 TS-W latched mechanism TS-L momentary mechanism
w/Ba9s socket		 TS-WL latched mechanism
w/Ba9s socket
TS-3P
3 block holder		 TS-5P
5 block holder		 TS-KQR
Mounting tool, 2~3Nm		 T8-BA9S-1LED-110VAC
110VAC clear LED		 T8-BA9S-1LED-12VDC
12VDC clear LED

 

PUSH BUTTON SWITCH PART
Illumination no no yes yes
Actuation alternate momentary alternate momentary
Function on-off (on)-off on-off (on)-off
Operator TS-22-RP-1* TS-22-RP-1* TS-22-RP-1* TS-22-RP-1*
Holder TS-3P TS-3P TS-3P TS-3P
Contact Block TS-A TS-A TS-A TA-A
Contact Block TS-W - TS-WL TS-L
Bulb no no T8-BA9S* T8-BA9S*

 

SELECTOR SWITCH PART
Function on-off on-on on-off-on (on)-off on-(off) on-(on) (on)-off-(on)
Selector TS-22-RS-1 TS-22-RS-1 TS-22-RS-2 TS-22-RS-4 TS-22-RS-4 TS-22-RS-4 TS-22-RS-5
Holder TS-3P TS-3P TS-3P TS-3P TS-3P TS-3P TS-3P
Contact Block TS-A TS-A TS-A TS-A TS-B TS-A (two) TS-A
Contact Block - TS-B TS-B - - TS-B -

 

EMERGENCY OFF SWITCH PART
Operator TS-22-RE-1
Holder TS-3P
Contact Block TS-B

 

PILOT LIGHT PART
Operator TS-22-RL-3R
Holder TS-3P
Contact Block TS-L
Bulb T8-BA9S*

 

Emergency stop switch, emergency off switch, emergency cut-off switch, e-stop switch, safety switch, A22E, A22EL
Mom: momentary
(on): momentary on or momentary contact
GCX1121, Allen-Bradley 800, Eaton Cutler-Hammer E22, IDEC, EAO, Moeller, Crouzel, Omron A165E
The European Machinery Safety Directive EN 418 requires all emergency OFF devices to be self-latching types and to have positive opening operation.  Devices have to be manually reset.  The actuators shall be mushroom head type and colored RED.  The background immediately around the device actuator should be colored YELLOW