Emergency Stop Switches, Emergency Off Switches, Emergency Cut Off Switches, E-stop Switches, Safety Switches, Selector switches, modular switches, Ignition Switches, Starter Switches (Tsen I Industrial Co.)

info@switchchannel.com

TS Modular Switches
Specifications Contact Rating: 125VAC 15A; 250/400/600VAC 10A; 6/12/24/50VDC 5A (cUL) 16(10)A 250VAC; 10(6)A 300VAC; 6(4)A 500VAC (CE) Contact Resistance: 50 milliohms max. at initial Insulation Resistance: 100 megaohms min. at 500VDC Dielectric Strength: 2500VAC 1 minute Life: 50,000 Operating Temperature: -20 to +80C Humidity: 45 to 85%RH Cutout: 22.5mm and 30.5mm Terminal: screw Protection: NEMA 3S(IP65) Safety Standard Approval: E306249, E306249 RoHS Compliant: yes Manufacture: I-Tsen			Non-metal Easy installation Head unit mounts into panel up to 7mm thick Control blocks are color coded for easy identification: green for momentary closed, red for momentary open Pressure plate wiring terminals for easy and secure wiring; accepting up to 14-AWG wire Replacement bulbs are available 12VDC and 110VAC LED lamps can be ordered separately and installed for longer life Catalog sheet Contact: info@switchchannel.com

P/N: TS-22-RE-1 emergency stop operator twist-to-released 22mm mounting hole	P/N: TS-22-RL-3R pilot light head 22mm mounting hole


P/N: TS-22-RP-1B Push button operator Flush len Blue color 22mm mounting hole	P/N: TS-22-RP-1G Push button operator Flush len Green color 22mm mounting hole	P/N: TS-22-RP-1R Push button operator Flush len Red color 22mm mounting hole		P/N: TS-22-RP-1Y Push button operator Flush len Yellow color 22mm mounting hole


P/N: TS-22-RP-3B Push button operator Blue color 22mm mounting hole	P/N: TS-22-RP-3G Push button operator Green color 22mm mounting hole	P/N: TS-22-RP-3R Push button operator Red color 22mm mounting hole		P/N: TS-22-RP-3Y Push button operator Yellow color 22mm mounting hole	P/N: TS-22-RP-3W Push button operator clear color 22mm mounting hole


P/N: TS-22-RS-1 Selector operator on-off, on-on 22mm mounting hole	P/N: TS-22-RS-2 Selector operator on-off-on 22mm mounting hole	P/N: TS-22-RS-4 Selector operator (on)-off, on-(off), on-(on) Spring returned 22mm mounting hole		P/N: TS-22-RS-5 Selector operator (on)-off-(on) Spring returned 22mm mounting hole


P/N: TS-A Contact block Normally open Non latched	P/N: TS-B Contact block Normally closed Non latched	P/N: TS-W Latched mechanism		P/N: TS-WL Latched mechanism w/Ba9s socket	P/N: TS-L Non latched mechanism w/Ba9s socket


P/N: TS-3P 3-block holder	P/N: TS-5P 5-block holder	P/N: TS-KQR Mounting tool, 2~3Nm		P/N: TS-22-RPL-128 Plastic boot


P/N: T8-BA9S-1LED-12VDC 12VDC clear LED (outer: negative, inner=positive)	P/N: T8-BA9S-1LED-110VAC 110VAC clear LED


Assembly steps
Step 1	Step 2	Step		Step 4	Step 5

Step 6


Module 1		Pilot light includes: one TS-22-RL-3R one TS-3P one TS-L

Module 2		Emergency stop switch includes: one TS-22-RE-1 one TS-3P one or three TS-B

Module 3		Push-on push-off switch includes: one TS-22-RP-1(color options) one TS-3P one or two TS-A one TS-W
Module 4		Push-on push-off switch with light includes: one TS-22-RP-1(color options) one TS-3P one or two TS-A one TS-WL one led (voltage options)

Module 5		Push-on push-off switch includes: one TS-22-RP-3(color options) one TS-3P one or two TS-A one TS-W
Module 6		Push-on push-off switch with light includes: one TS-22-RP-3(color options) one TS-3P one or two TS-A one TS-WL one led (voltage options)

Module 7		Momentary on switch includes: one TS-22-RP-3(color options) one TS-3P one to three TS-A
Module 8		Momentary off switch includes: one TS-22-RP-3(color options) one TS-3P one to three TS-B

Module 9		On-off switch includes: one TS-22-RS-1 one TS-3P one to three TS-A
Module 10		On-on switch includes: one TS-22-RS-1 one TS-3P one TS-A one TS-B

Module 11		On-off-on switch includes: one TS-22-RS-2 one TS-3P one TS-A one TS-B

Module 12		(on)-off momentary on switch includes: one TS-22-RS-4 one TS-3P one to three TS-A
Module 13		(on)-on momentary on switch includes: one TS-22-RS-4 one TS-3P one TS-A one TS-B

Module 14		(on)-off-(on) momentary on switch includes: one TS-22-RS-5 one TS-3P one TS-A one TS-B

(on): momentary on or momentary contact
The European Machinery Safety Directive EN 418 requires all emergency OFF devices to be self-latching types and to have positive opening operation. Devices have to be manually reset. The actuators shall be mushroom head type and colored RED. The background immediately around the device actuator should be colored YELLOW